If your 2015 Jeep Cherokee’s backup camera isn’t working, you can try resetting it. To do this, first make sure that the vehicle is in Park and that the engine is turned off. Then, locate the backup camera fuse in the fuse box and remove it.
Next, reconnect the battery and turn on the engine. Finally, replace the fuse and test the camera to see if it’s working properly.
- Locate the backup camera on your 2015 Jeep Cherokee
- The camera is located on the rear of the vehicle, near the license plate
- Press and hold the reset button on the backup camera for three seconds
- The reset button is located on the side of the camera housing
- Release the reset button after three seconds
- The backup camera will reboot and should now be operational again
Jeep Cherokee Backup Camera Glitch
If you own a Jeep Cherokee, you may have experienced the backup camera glitch. This problem occurs when the camera is turned on and off repeatedly, causing the image to become distorted. The good news is that there is a fix for this issue.
To fix the backup camera glitch, simply turn off the engine and then restart it. This will reset the camera and should fix the problem. If you are still having issues, you can try unplugging the battery for a few minutes and then reconnecting it.
If you are experiencing this issue, don’t worry – it’s easily fixed!
Credit: www.youtube.com
FAQ
How Do I Restart My Backup Camera?
If your backup camera isn’t working, there are a few things you can do to try and fix the issue. First, check to see if the camera is turned on. If it’s not, turn it on and see if that fixes the problem.
If the camera is on and you’re still not seeing anything, try restarting your car. This will reset all the electronics in your car and may fix the issue with your backup camera. If restarting your car doesn’t work, there could be an issue with the wiring of your backup camera.
Check to make sure all the wires are connected properly and that there are no loose connections. If everything looks good with the wiring, then there may be an issue with the camera itself. In this case, you’ll need to replace the backup camera.
Why Isn’t My Backup Camera Working on My Jeep?
If your Jeep backup camera isn’t working, there are a few things that could be the issue. First, you’ll want to check the fuse to see if it’s blown. If it is, replace it and see if that solves the problem.
If not, the next thing to check is the wiring harness for any loose or damaged wires. If everything looks good there, the issue could be with the camera itself. Try cleaning the lens and making sure there’s no dirt or debris blocking the view.
If none of these solutions work, you may need to take your Jeep to a mechanic or dealership to have them take a look at it.
How Do You Turn on the Backup Camera on a 2015 Jeep Grand Cherokee?
Assuming you have a 2015 Jeep Grand Cherokee with the factory-installed backup camera, here are the instructions on how to turn it on.
1. Put your Jeep Grand Cherokee in reverse by shifting the transmission into that gear. The backup camera will automatically turn on and display a live video feed of what’s behind you on the infotainment screen.
2. If for some reason the backup camera doesn’t turn on when you put your Jeep into reverse, you can manually turn it on by pressing the “Camera” button located on the center stack near the infotainment screen. This will bring up the rearview camera display so you can see what’s behind you even when you’re not in reverse gear.
What Causes a Backup Camera to Stop Working?
Backup cameras are one of the most useful safety features on modern vehicles, but they can also be one of the most finicky. If your backup camera has stopped working, it could be due to any number of issues. Here are some of the most common causes of backup camera failure and what you can do to fix them.
One of the most common reasons for a backup camera to stop working is simply because it’s become dirty. The lens on the camera can easily become obscured by mud, snow, or even just dust and debris from the road. If this is the case, simply cleaning the lens with a soft cloth should do the trick.
If your backup camera is still not working after you’ve cleaned the lens, there may be an issue with the wiring. Check to make sure all connections are tight and free of corrosion. If you’re comfortable doing so, you can also try checking for loose wires or damaged connectors inside the camera itself.
In some cases, a failed backup camera may just be due to a blown fuse. Consult your vehicle’s owner manual to locate the fuse box and check if the fuse for your backup camera has blown. Replacing a blown fuse is usually a quick and easy fix.
If none of these solutions seem to work, then it’s possible that there’s a more serious problem with your backup camera system.
How to change backup camera options 2015 Jeep Cherokee
Conclusion
If you have a 2015 Jeep Cherokee and need to reset the backup camera, there are a few steps you’ll need to follow. First, locate the fuse box under the hood and remove the fuse for the backup camera. Next, disconnect the battery for about 30 seconds.
Finally, reconnect the battery and start your Jeep – the backup camera should now be reset!