A backup camera is a great addition to any Jeep Wrangler. Want to install a backup camera on your Jeep Wrangler? This comprehensive guide will walk you through the step-by-step process, providing you with the knowledge and instructions to successfully install a backup camera and enjoy enhanced safety and convenience.
Installing Backup Camera on Jeep Wrangler: Step-by-Step Guide
- Unscrew and remove the Jeep’s license plate
- Feed the power cord for the backup camera through the hole in the bumper where the license plate was mounted
- Attach the backup camera to the rear of the Jeep, above the license plate opening
- Reconnect the negative battery terminal to restore power to your Jeep
- Test your new backup camera by putting your Jeep in reverse
Jeep Wrangler Backup Camera With Monitor
In the market for a new Jeep Wrangler? If you’re looking for one that comes equipped with a backup camera and monitor, we’ve got just the thing. Here’s everything you need to know about the Jeep Wrangler Backup Camera With Monitor.
The Jeep Wrangler Backup Camera With Monitor is a great addition to any Jeep Wrangler. It gives you an extra set of eyes when reversing, and makes parking a breeze. The camera mounts on the rear of your Jeep Wrangler, and the monitor attaches to your dash.
The system is completely wireless, so there’s no need to run any wires through your vehicle. The image quality on the Jeep Wrangler Backup Camera With Monitor is excellent, thanks to its HD resolution. The camera has night vision capabilities, so you’ll be able to see even when it’s dark out.
And since the system is wireless, there’s no need to worry about interference from other electronics in your vehicle. Installing the Jeep Wrangler Backup Camera With Monitor is easy too. It comes with all the necessary hardware and instructions.
So in no time at all, you’ll be backing up and parking like a pro!
Credit: www.rearviewsafety.com
FAQ
Can a Backup Camera Be Added to a Jeep Wrangler?
Yes, a backup camera can be added to a Jeep Wrangler. There are many different ways to do this, but the most popular methods seem to be aftermarket kits that replace the rearview mirror, or installing a dedicated screen in the dash. Both of these methods require some wiring and installation, but nothing too difficult.
There are also wireless options available that use a transmitter mounted on the license plate frame and a receiver/display mounted inside the vehicle. These systems typically have shorter range than wired versions, but may be easier to install.
How Much Does It Cost to Get a Backup Camera Installed on a Jeep Wrangler?
If you’re looking to add a backup camera to your Jeep Wrangler, you can expect to pay anywhere from $100 to $500 for the camera itself, plus another $100 or so for installation.There are a few things to keep in mind when shopping for a backup camera for your Jeep. First, you’ll want to make sure that the camera is compatible with your particular model of Wrangler.
Second, you’ll need to decide whether you want a wired or wireless camera. Wired cameras are generally less expensive, but they require more work to install. Wireless cameras are more expensive up front, but they’re much easier to install.
Once you’ve selected the right camera for your Jeep, the next step is finding a reputable installer. If you have a friend or family member who is experienced with car electronics, they may be able to help you out. Otherwise, your best bet is taking it to a professional shop and paying them to do the job right.
All told, expect to spend around $200-$600 on adding a backup camera to your Jeep Wrangler.
Where Do You Put the Back Up Camera on a Jeep Wrangler?
If you’re looking to add a backup camera to your Jeep Wrangler, there are a few different places you can mount it. Here are some of the most popular locations:
1. On the rear bumper: This is one of the most common places to mount a backup camera on a Jeep Wrangler. It’s out of the way and provides a clear view behind the vehicle.
2. On the tailgate: Another popular option is to mount the camera on the tailgate. This allows for a wider field of view than if it were mounted on the bumper.
3. On the spare tire carrier: If you have an aftermarket spare tire carrier, there may be a spot specifically designed for mounting a backup camera. This is usually located in between the taillights.
4. In-dash: Some Jeep Wranglers come with an in-dash display that can be used for mounting a backup camera.
If your vehicle doesn’t have this feature, you can also purchase an aftermarket head unit that has this capability built-in (just make sure it’s compatible with your Jeep).
Can I Add a Backup Camera to My 2017 Jeep Wrangler?
It is possible to add a backup camera to your 2017 Jeep Wrangler. There are aftermarket kits available that will allow you to do this, and the installation process is generally not too difficult. However, there are a few things to keep in mind.
First, you will need to make sure that the kit you purchase is compatible with your specific model of Jeep Wrangler. Secondly, the installation process may require some minor modifications to your vehicle, such as drilling holes for the camera mounting brackets. Finally, you will need to run wiring from the camera to the head unit or display screen inside your Jeep Wrangler.
With all of that said, adding a backup camera to your 2017 Jeep Wrangler is definitely possible and can be a great addition to your vehicle.
2007 – 2017 Jeep Wrangler Backup Camera Install
Conclusion
Installing a backup camera on a Jeep Wrangler is a simple process that can be completed in a few minutes. The first step is to remove the spare tire and disconnect the battery. Next, locate the taillight wiring harness and connect the positive and negative wires to the corresponding terminals on the camera.
Once all of the connections are made, replace the spare tire and reconnect the battery. Finally, test the camera to ensure it is working properly.